Publications: Composite Materials

Dissertations

 

Abdul Hamid, Z. M.; Analysis of fatigue damage in unidirectional carbon fibre reinforced polymer material, Fraunhofer IWM Forschungsberichte 29, Fraunhofer Verlag, Stuttgart (2023)

Rohrmüller, B.; Characterization and modeling of fiber-matrix interfaces of a glass fiber reinforced sheet molding compound, Fraunhofer IWM Forschungsberichte 30, Fraunhofer Verlag, Stuttgart (2023)

Schober, M.; On the characterization and modeling of interfaces in fiber reinforced polymer structures (Dissertation); Fraunhofer IWM Forschungsberichte 23; Fraunhofer IWM (Hrsg.) Fraunhofer Verlag Stuttgart (2020) Link

Fliegener, S.; Micromechanical finite element modeling of long fiber reinforced thermoplastics (Dissertation); Fraunhofer IWM Forschungsberichte 8; Fraunhofer IWM (Hrsg.) Fraunhofer Verlag Stuttgart (2016) Link

Publications

 

2024

Altenbach, H.; Hohe, J.; Mittelstedt, C. (Eds.), Progress in Structural Mechanics, Part of the book series: Advanced Structured Materials, Volume 199; Springer Nature Switzerland AG, Cham, Switzerland (2024) 304 pp. Link

Hohe, J.; Beckmann C.; Schober, M.; Grygier, J.; Vogelbacher, C.; Fränkle, J.; Jatzlau, P.; Sauerwein, C., On the potential of machine learning assisted tomography for rapid assessment of FRP materials with defects, Progress in Structural Mechanics, Advanced Structured Materials Volume 1999; Altenbach, H.; Hohe, J.; Mittelstedt, C. (Eds.); Springer Nature Switzerland, Cham, Schweiz (2024) 167-188 Link

nach oben

2023

Beckmann, C.; Findeisen, C.; Schober, M.; Judt, P.; Jatzlau, P.; Schäuble, R.; Hohe, J., Probabilistic analysis and integrity assessment of filament wound CFRP pressure vessels accounting for stochastically distributed micro defects, in Proc. of 17th European Conference on Spacecraft Structures, Materials and Environmental Testing (ECSSMET); ESA/ESTEC, Noordwijk, NL (2023) 496-501 Link

Christ, N.; Montesano, J.; Hohe, J., Experimental investigation of carbon long fiber reinforced polyamide 6 exposed to environmental conditions, PAMM 22/1 Special Issue: 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM); Kaliske, M. (Ed.); Wiley-VCH GmbH, Weinheim (2023) Art e202200166, 7 pp. Link

Christ, N.; Scheuring, B.M.; Montesano, J.; Hohe, J., A Python package for homogenization procedures in fiber reinforced polymers, The Journal of Open Source Software JOSS 8/87 (2023) Art. 5295, 4 pp. Link

Christ, N.; Scheuring, B. M.; Montesano, J.; Hohe, J., Characterization and simulation of the interface between continuously and discontinuously fiber reinforced thermoplastics, in Proc. of 23rd International Conference on Composite Materials ICCM 23; Falzon, B. G.; McCarthy, C. (Eds.); Queen's University Belfast, Belfast, Northern Ireland (2023) ICCM23_PPT_410, 2 pp. Link

Findeisen, C.; Hamid Abdul, Z.; Rohrmüller, B.; Spancken, D.; Laveuve, D.; Hohe, J., A continuum damage mechanics model for short  fiber reinforced composites, in Proc. of 23rd International Conference on Composite Materials, ICCM 2023; Falzon, B. G.; McCarthy, C. (Eds.); Queen's University Belfast, Belfast, Northern Ireland (2023) ICCM23_Full_Paper_85, 15 pp. Link

Findeisen, C.; Hohe, J., Derivation and validation of a mechanically consistent continuum damage model for brittle composite materials, in Proc. of 23rd International Conference on Composite Materials, ICCM 2023; Falzon, B. G.; McCarthy, C. (Eds.); Queen's University Belfast, Belfast, Northern Ireland (2023) ICCM23_Full_Paper_84, 2 pp. Link

Findeisen, C.; Schober, M.; Appel, S.; Hohe, J.; Weiss, K.-P., Development and implementation of a parameter estimation and post-processing tool for the failure analysis of composite materials, in Proc. of 17th European Conference on Spacecraft Structures, Materials and Environmental Testing (ECSSMET);ESA/ESTEC, Noordwijk, NL (2023) 539-543 Link

Hohe, J.; Fliegener, S., Anisotropic creep analysis of fiber reinforced load point support structures for thermoplastic sandwich panels, Creep in Structures VI. IUTAM 2023. Advanced Structured Materials, Vol. 194; Altenbach, H.; Naumenko, K. (Eds.); Springer Nature Switzerland AG, Cham, Switzerland (2023) 161-274 Link

Koplin, C.; Schlüter, B.; Hohe, J.; Schirmeister, C.; Hees, T.; Mühlhaupt, R., Jaeger, R., 3D printing of lightweight “All-Polyethylene Single Component“ composite materials designed for circularity, Fraunhofer Direct Digital Manufacturing Conference DDMC 2023; Müller, B. (Hrsg.); Fraunhofer Verlag, Stuttgart (2023) 5 pp. Link

Rohrmüller, B.; Kneisel, F.; Hohe, J.; Beckmann, C., Experimental investigation of the uncertainty of disordered fiber-reinforced injection-molded components, in Proc. of UNCECOMP 2023, 5th ECCOMAS Thematic Conference on Uncertainty Quantification in Computational Sciences and Engineering; Papadrakakis, M; Papadopoulos, V; Stefanou, G (Eds.); National Technical University of Athens, Athens, Greece (2023) Art. 193216, 11 pp. Link

Schreyer, L.; Scheuring, B.; Christ, N.; Blarr, J.; Krauß, C.; Liebig, W. V.; Wiedemann, K. A.; Böhlke, T.; Hrymak, A.; Kärger, L., Continuous simulation of a continuous-discontinuous fiber-reinforced thermoplastic (CODICOFRTP) Compression molding process, in Proc. of 23rd International Conference on Composite Materials, ICCM 2023; Falzon, B. G.; McCarthy, C. (Eds.); Queen's University Belfast, Belfast, Northern Ireland (2023) ICCM23_Full_Paper_98, 12 pp. Link

Tlatlik, J.; Hohe, J.; Münstermann, S., Analysis and improvement of local cleavage fracture models at elevated loading rates, Theoretical and Applied Fracture Mechanics 125 (2023) Art. 103857, 18 pp. Link

nach oben

2022

Beckmann, C.; Hohe, J., Generation of stochastic cellular structures with anisotropic cell characteristics on the basis of ellipsoid packings, Advances in Engineering Software 165 (2022) Art. 103089; 9 pp. Link

Diemert, J.; Hohe, J.; Rohlfing, J.; Troge, J., Quiet please -  “PolymerAkustik” project: Holistic solutions for low-noise plastic components, Kunststoffe international 7 (2022) 94-96 Link

Graupner, N.; Hohe, J.; Schober, M.; Rohrmüller, B.; Weber, D.; Bruns, L.; Bruns, A.; Müssig, J., A competitive study of the static and fatigue performance of flax, glass, and flax/glass hybrid composites on the structural example of a light railway axle tie, Frontiers in Materials 9 (2022)  Art. 837289, 20 pp. Link

Hohe, J.; Schober, M.; Weiss, K.P.; Appel, S., Verification of Puck's criterion for CFRP laminates under multiaxial loads at ambient and cryogenic temperatures, Composites Science and Technology 228 (2022) Art. 109631, 10 pp. Link

Xu, H.; Kuczynska, M.; Schafet, N.; Welschinger, F.; Hohe, J., FE-based damage modeling approach for short fiber reinforced thermoplastics under quasi-static load coupling anisotropic viscoplasticity and matrix degradation, Journal of Composite Materials 56/20 (2022) 3113-3125 Link

nach oben

2021

Hohe, J., Geometry modelling and elastic property prediction for short fiber composites, Multi-scale continuum mechanics modelling of fibre-reinforced polymer composites, Part I: Geometry construction and homogenization of linear elastic material behavior at micro- and meso-scale; van Paepegem, W. (Ed.); Elsevier B.V., Amsterdam, NL (2021) 55-77 Link

Hohe, J.; Neubrand, A.; Fliegener, S.; Beckmann, C.; Schober, M.; Weiss, K.-P.; Appel, S., Performance of fiber reinforced materials under cryogenic conditions — A review, Composites Part A: Applied Science and Manufacturing 141 (2021) Art. 106226, 15 Seiten Link

Hohe, J.; Schober, M.; Fliegener, S.; Weiss, K.-P.; Appel, S., Effect of cryogenic environments on failure of carbon fiber reinforced composites, Composites Science and Technology 212 (2021) 108850 1-13 Link

Hohe, J.; Schober, M.; Weiss, K.-P.; Appel, S., Validation of Puck’s failure criterion for CFRP composites in the cryogenic regime, CEAS Space Journal 13/1 (2021) 145-153 Link

Rohrmüller, B.; Gumbsch, P.; Hohe, J., Calibrating a fiber–matrix interface failure model to single fiber push-out tests and numerical simulations, Composites Part A: Applied Science and Manufacturing 150 (2021) Art. 106607; 10 Seiten Link

Schober, M.; Dittmann, K.; Gumbsch, P.; Hohe, J., Experimental-numerical characterization of the nonlinear microstructural behavior of fiber-reinforced polymer structures, Multi-scale continuum mechanics modelling of fibre-reinforced polymer composites, Part II: Constitutive modelling of material nonlinearity and damage at micro- and meso-scale; van Paepegem, W. (Ed.); Elsevier B.V., Amsterdam, NL (2021) 405-426 Link

Van der Biest, O.; Neubrand, A., Functionally graded ceramics, Encyclopedia of Materials: Technical Ceramics and Glasses, Vol. 1; Pomeroy, M. (Ed.); Elsevier B.V., Amsterdam, NL (2021) 374-398 Link

Xu, H.; Kuczynska, M.; Schafet, N.; Welschinger, F.; Hohe, J., Modeling the anisotropic temperature-dependent viscoplastic deformation behavior of short fiber reinforced thermoplastics, Composites Science and Technology 213 (2021) Art. 108958, 10 Seiten Link

to top

2020

Findeisen, C.; Forest, S.; Hohe, J.; Gumbsch, P., Discrete and continuum modelling of size effects in architectured unstable metamaterials, Continuum Mechanics and Thermodynamics 32/6 (2020) 1629–1645 Link

Fliegener, S.; Hohe, J., An anisotropic creep model for continuously and discontinuously fiber reinforced thermoplastics, Composites Science and Technology 194 (2020) 108168, 11 Seiten Link

Hohe, J.; Gall, M.; Fliegener, S.; Abdul Hamid, Z. M., A continuum damage mechanics model for fatigue and degradation of fiber reinforced materials, Journal of Composite Materials 54/21 (2020) 2837-2852 Link

Hohe, J.; Schober, M.; Weiss, K. P.; Appel, S., Failure criteria for CFRP composites in the cryogenic regime, in Proc. of Aerospace Europe Conference AEC 2020; European Space Agency (Ed.); European Space Agency, Paris, F (2020) Paper No. #00354, 6 pp Link

Lienhard, J.; Discher, D.; Hohe, J., Strain rate dependent damage evolution in long glass fiber reinforced polypropylene, Composites Science and Technology 189 (2020) 108007 1-11 Link

Müssig, J.; Kelch, M.; Gebert, B.; Hohe, J.; Luke, M.; Bahners, T., Improvement of the fatigue behaviour of cellulose/polyolefin composites using photo-chemical fibre surface modification bio-inspired by natural role models, Cellulose 27/10 (2020) 5815-5827 Link

Rohlfing, J.; Diemert, J.; Lüssenheide, S.; Abdul Hamid, Z. M.; Hohe, J.; Kranz, B.; Georgi, T., Vibroacoustic characterisation methods for polymer materials and components, in Proc. of 29th ISMA International Conference on Noise and Vibration Engineering 2020; KU Leuven, Leuven, Belgien (2020) ID283 15 Seiten Link

to top

2019

Abdul Hamid, Z.M.; Florea, M.; Fliegener, S.; Schober, M.; Hohe, J.; Rühe, J., Chemical modification of fiber-matrix interfaces of glass fiber reinforced thermoplastics and methods for interface characterization, Advanced Engineering Materials 21/6 (2019) 1800590 1-11 Link

Fliegener, S.; Rausch, J.; Hohe, J., Loading points for industrial scale sandwich structures - a numerical and experimental design study, Composite Structures 226 (2019) 111278 1-13 Link

Hohe, J.; Beckmann, C.; Böhme, W.; Weise, J.; Reinfried; M.; Luthardt, F.; Rapp, F.; Diemert, J., An experimental and numerical survey into the potential of hybrid foams, Mechanics of Materials 136 (2019) 103063 1-15 Link

Hohe, J.; Fliegener, S., An anisotropic creep model for continuously and discontinuously fiber reinforced materials, PAMM 19/1Special Issue: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM); Eberhardsteiner, J.; Schöberl, M. (Eds.); Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim (2019) e201900086, 2 Seiten Link

Reiser, J.; Hoffmann, A.; Hain, J.; Jäntsch, U.; Klimenkov, M.; Hohe, J.; Mrotzek, T., Thermal management materials based on molybdenum (Mo) and copper (Cu): Elucidation of the rolling-induced evolution of thermophysical properties (e.g. CTE), Journal of Alloys and Compounds 776 (2019) 387-416 Link

Rohrmüller, B.; Schober, M.; Dittmann, K.; Gumbsch, P.; Hohe, J., Characterization of fiber matrix interface of continuous-discontinuous fiber reinforced polymers on the microscale, PAMM 19/1Special Issue: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM); Eberhardsteiner, J.; Schöberl, M. (Eds.); Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim (2019) e201900190, 2 Seiten Link

Schober, M.; Dittman, K.; Gumbsch, P.; Kuboki, T.; Hohe, J., Mechanical microstructure characterization of discontinuous-fiber reinforced composites by means of experimental-numerical micro tensile tests, PAMM 19/1Special Issue: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM); Eberhardsteiner, J.; Schöberl, M. (Eds.); Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim (2019) e2019001201, 2 Seiten Link

Schober, M.; Hohe, J.; Gumbsch, P.; Kuboki, T., Interlaminar fracture analysis of consolidated GF-PA6-tapes, Continuous–discontinuous fiber-reinforced polymers - An integrated engineering approach; Böhlke, T.; Henning, F.; Hrymak, A.; Kärger, L.; Weidenmann, K.A.; Wood, J.T. (Eds.); Carl Hanser Verlag, München (2019) 104-119 Link

Shi, Y.; Neubrand, A.; Koch, D., Characterization of hardness and stiffness of ceramic matrix composites through instrumented indentation test, Advanced Engineering Materials 21/5 (2019) 1800806 1-8 Link

Zerbst, U.; Madia, M.; Schork, B.; Hensel, J.; Kucharczyk, P.; Ngoula, D.; Tchuindjang, D.; Bernhard, J.; Beckmann, C., , Fatigue and fracture of weldments - The IBESS approach for the determination of the fatigue life and strength of weldments by fracture mechanics analysis; ; Springer Nature Switzerland AG, Cham, Schweiz (2019) 157 Seiten Link

to top

2017-2018

Beckmann, C.; Kennerknecht, T.; Preußner, J.; Farajian, M.; Luke, M.; Hohe, J., Micromechanical investigation and numerical simulation of fatigue crack formation in welded joints, Engineering Fracture Mechanics 198 (2018) 142-157 Link

Hohe, J.; Paul, H.; Beckmann, C., A probabilistic elasticity model for long fiber reinforced thermoplastics with uncertain microstructure, Mechanics of Materials 122 (2018) 118-132 Link

Abdul Hamid, Z.M.; Hohe, J.; Gall, M.; Fliegener, S.; Gumbsch, P., Fatigue damage and degradation model for carbon fibre reinforced polymer materials, PAMM 17/1 Special Issue: 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM); Könke, C.; Trunk, C. (Eds.); Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim (2017) 259-260 Link

Beckmann, C.; Hohe, J.; Modeling transgranular crack growth in random 3D grain structures under cyclic loading; Probabilistic Engineering Mechanics 50 (2017) 45-52 Link

Findeisen, C.; Hohe, J.; Kadic, M.; Gumbsch, P.; Characteristics of mechanical metamaterials based on buckling elements; Journal of the Mechanics and Physics of Solids 102 (2017) 151-164 Link

Fliegener, S.; Kennerknecht, T.; Kabel, M.; Investigations into the damage mechanisms of glass fiber reinforced polypropylene based on micro specimens and precise models of their microstructure; Composites Part B: Engineering 112 (2017) 327-343 Link

Hohe, J.; Non-classical effects of the transverse core compressibility on the static and dynamic response of soft core sandwich structures; in Proc. of 22nd International Conference on Computer Methods in Mechanics CMM 2017; Polish Association for Computational Mechanics (Ed.); Selbstverlag - Lublin University of Technology, Lublin, Polen (2017) 2 Seiten

Hohe, J.; Gall, M.; Gauch, H.; Fliegener, S.; Abdul Hamid, Z.M.; A material model for prediction of fatigue damage and degradation of CFRP materials; Key Engineering Materials 742 (2017) 740-744 Link

Reiser, J.; Garrison, L.; Greuner, H.; Hoffmann, J.; Weingärtner, T.; Jäntsch, U.; Klimenkov, M.; Franke, P.; Bonk, S.; Bonnekoh, C.; Sickinger, S.; Baumgärtner, S.; Bolich, D.; Hoffmann, M.; Ziegler, R.; Konrad, J.; Hohe, J.; Hoffmann, A.; Mrotzek, T.; Seiss, M.; Rieth, M.; Möslang, A.; Ductilisation of tungsten (W): Tungsten laminated composites; International Journal of Refractory Metals & Hard Materials 69 (2017) 66-109 Link

Schober, M.; Kuboki, T.; Ameri, E.; Hohe, J.; Gumbsch, P., Effects of process parameters on the interlaminar fracture toughness of GF-PA6-tapes, PAMM 17/1 Special Issue: 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM); Könke, C.; Trunk, C. (Eds.); Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim (2017) 273-274 Link

to top

2016

Beckmann, C.; Farajian, M.; Siegele, D.; Hohe, J.; Modelling and simulation of fatigue crack initiation in metallic joints based on crystal plasticity; Letters in Applied NanoBioScience 5/2 (2016) 354-357 Link

Beckmann, C.; Hohe, J.; A probabilistic constitutive model for closed-cell foams; Mechanics of Materials 96 (2016) 96-105 Link

Fliegener, S.; Hohe, J.; Gumbsch, P.; The creep behavior of long fiber reinforced thermoplastics examined by microstructural simulations; Composites Science and Technology 131 (2016) 1-11 Link

Frenzel, T.; Findeisen, C.; Kadic, M.; Gumbsch, P.; Wegener, M.; Tailored buckling microlattices as reusable light-weight shock absorbers; Advanced Materials 28/28 (2016) 5865-5870 Link

Hohe, J.; Fliegener, S.; Beckmann, C.; Multiscale analysis of uncertainties in lightweight structures consisting of materials with uncertain microstructure; in Proc. of 14th European Conference on Spacecraft Structures, Materials and Environmental Testing ECSSMET 2016; CNES, Centre National d'Études Spatiales; Toulouse, Frankreich (2016) 9 Seiten

Hohe, J.; Fliegener, S.; Findeisen, C.; Reiser, J.; Widak, V.; Rieth, M.; Numerical exploration into the potential of tungsten reinforced CuCrZr matrix composites; Journal of Nuclear Materials 470 (2016) 13-29 Link

Kabel, M.; Fliegener, S.; Schneider, M.; Mixed boundary conditions for FFT-based homogenization at finite strains; Computational Mechanics 57/2 (2016) 193-210 Link

to top

2014-2015

Fliegener, S.; Hohe, J.; Haspel, B.; Weidenmann, K.A.; Micromechanical modeling of the nonlinear deformation of LFTS under consideration of the effects of interface damage; in Proc. of 20th International Conference on Composite Materials 2015; International Committee on Composite Materials (ICCM), Surrey, England (2015) 11 Seiten Link

Hohe, J.; Load and frequency interaction effects in dynamic buckling of soft core sandwich structures; Composite Structures 132 (2015) 1006-1018 Link

Hohe, J.; Beckmann, C.; Paul, H.; Modeling of uncertainties in long fiber reinforced thermoplastics; Materials and Design 66/ B (2015) 390-399 Link

Hohe, J.; Siegele, D.; Bechler, E.; Nagel, G.; Standard and customized correlation of crack resistance curves and charpy upper shelf energy for German reactor pressure vessel steels; International Journal of Pressure Vessels and Piping 134 (2015) 101-111 Link

Shi, Y.; Koch, D.; Hausherr, J.-M.; Neubrand, A.; Influence of specimen geometry and surface quality on the bending strength of short fiber-reinforced C/SiC; Materials Science Forum 825-826 (2015) 249-255 Link

Baumeister, J.; Weise, J.; Hirtz, E.; Höhne, K.; Hohe, J.; Applications of aluminium hybrid foam sandwiches in battery housings for electric vehicles; Materialwissenschaft und Werkstofftechnik 45/12 (2014) 1099-1107 Link

Beckmann, C.; Farajian, M.; Siegele, D.; Hohe, J.; Modelling and simulation of fatigue crack initiation in welded joints based on crystal plasticity; in Proc. of 67th IIW Annual Assembly & International Conference 2014; International Institute of Welding (Ed.); International Institute of Welding, Paris, Frankreich (2014) XIII-2535-14 1-8 Link

Beckmann, C.; Hohe, J.; Effects of material uncertainty in the structural response of metal foam core sandwich beams; Composite Structures 113 (2014) 382–395 Link

Dadda, J.; Müller, E.; Perlt, S.; Höche, T.; Hermann, R.; Neubrand, A.; Evolution of phase segregation and eutectic structures in AgPb18SbTe20; Physica Status Solidi A 211/6 (2014) 1276-1281 Link

Fliegener, S.; Luke, M.; Gumbsch, P.; 3D microstructure modeling of long fiber reinforced thermoplastics; Composites Science and Technology 104 (2014) 136-145 Link

Gall, M.; Hohe, J.; Simulation of adhesive joints in composite structures with efficient virtual determination of cohesive zone parameters; in Tagungsband NAFEMS-Seminar: Simulation von Composites - Eine geschlossene Prozesskette?; NAFEMS Deutschland GmbH (Ed.); NAFEMS Deutschland GmbH, Bernau am Chiemsee (2014) 324-332 Link

Hohe, J.; Beckmann, C.; Paul, H.; Local probabilistic homogenization schemes for assessment of material uncertainties in solid foams; PAMM 14/1 Special Issue: 85th Meeting of the International Association of Applied Mathematics and Mechanics GAMM 2014; Steinmann, P.; Leugering, G. (Hrsg.); Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim (2014) 551-552 Link

Müller-Köhn, A.; Janik, J.; Neubrand, A.; Klemm, H.; Moritz, T.; Michaelis, A.; Fabrication of short fiber reinforced SiCN by injection molding of preceramic polymers; High Temperature Ceramic Matrix Composites 8: Ceramic Transactions, Vol. 248; Zhang, L.; Jiang, D. (Eds.); Wiley, Hoboken, NJ, USA (2014) 381-389 Link

to top

2013

Fliegener, S.; Elmer, D.; Seifert, T.; Luke, M.; Multi-scale modeling of the viscoelastic properties of non-woven, thermoplastic composites; in Proc. of International Conference on Composite Materials ICCM 19; Hoa, S. V. (Ed.); Curran Associates, Inc., Red Hook, NY, USA (2013 4061-4072 Link

Gall, M.; Thielicke, B.; Fatigue lifetime study of piezoceramic patch transducers; Acta Mechanica 224/11 (2013) 2529-2545 Link

Gall, M.; Thielicke, B.; Lifetime of laminar piezoceramic modules under cyclic tensile loading; in Proc. of 4th Scientific Symposium "Lightweight Design by Integrating Functions" 2013; CRC Transregio 39 "Production technologies for light metal and fiber reinforced composite based components with integrated piezoceramic sensors and actuators (PT-PIESA)"; Neugebauer, R. (Hrsg.); Universität Chemnitz, Chemnitz (2013) 13-17 Link

Garesci, F.; Fliegener, S.; Young’s modulus prediction of long fiber reinforced thermoplastics; Composites Science and Technology 85 (2013) 142-147 Link

Hohe, J.; Advanced simulation and optimization techniques for composites; Structural Materials and Processes in Transportation; Lehmhus, D.; Busse, M.; Herrmann, A.S.; Kayvantash, K. (Eds.) Wiley-VCH, Weinheim (2013) 447-461 Link

Hohe, J.; Effect of core and face sheet anisotropy on the natural frequencies of sandwich shells with composite faces; International Journal of Composite Materials 3/6B (2013) 40-52 Link

Hohe, J.; Beckmann, C.; Prediction of the uncertainty in the response of lightweight structures consisting of solid foams; in Proc. of 2nd World Congress on Integrated Computational Materials Engineering ICME 2013; Li, M.; Campbell, C.; Thoruton, K.; Holm, E.; Gumbsch, P. (Eds.); John Wiley & Sons, Hoboken, NJ, USA (2013) 237-242 Link

Hohe, J.; Paul, H.; Beckmann, C.; Jurczak, G.; Young, T.D.; A numerical model for prediction of the uncertainties in long fibre reinforced thermoplastics; in Book of Abstracts of 3rd International Conference of Material Modelling ICMM3; Dtuzewski, P.; Jurczak, G.; Young, T.D. (Eds.); Instytut Podstawowych Problemów Techniki, Polska Akademia Nauk, Warschau, Polen (2013) 269 Link

Neubrand, A.; Dadda, J.; Mueller, E.; Perlt, S.; Höche, T.; Spatially resolved thermal conductivity measurements using a thermoreflectance microprobe; Journal of Electronic Materials 42/7 (2013) 2165-2171 Link

Uhlmann, E.; Borsoi Klein, T.; Schweitzer, L.; Neubrand, A.; NC-Form grinding of carbon fibre reinforced solicon carbide composite; Key Engineering Materials 535-536 (2013) 314-317 Link

to top

2011-2012

Beckmann, C.; Hohe, J.; Analysis of uncertainty effects in sandwich structures with disordered cores - probabilistic analysis of structural response; in Proc. of 10th International Conference Sandwich Structures 2012 ICSS-10; Casrari, P. (Ed.); Université de Nantes, Frankreich (2012) 71-72 Link

Beckmann, C.; Hohe, J.; Assessment of material uncertainties in solid foams based on localhomogenization procedures; International Journal of Solids and Structures 49/19-20 (2012) 2807-2822 Link

Beckmann, C.; Hohe, J.; Numerical assessment of disorder effects in metal foam core sandwich beams based on a local homogenization procedure; PAMM 12/1 Special Issue: 83rd Annual Meeting of the International Association of Applied Mathematics and Mechanics GAMM (2012) 415-416 Link

Fliegener, S.; Luke, M.; Reif, M.; Microstructure-based modeling of the creep behavior of long-fiber-reinforced thermoplastics; in Proc. of 15th European Conference on Composite Materials 2010 ECCM 15; Quaresimin, M. (Ed.); University of Padova, Padua, Italy (2012) 7 Seiten Link

Hohe, J.; Beckmann, C.; Local probabilistic homogenization schemes for assessment of material uncertainties in solid foams; PAMM 12/1 Special Issue: 83rd Annual Meeting of the International Association of Applied Mathematics and Mechanics GAMM 2012 (2012) 427-428 Link

Hohe, J.; Beckmann, C.; Prediction of the uncertainty in the response of foam core sandwich structures due to disordered microstructure of the material; in Proc. of International Conference on Cellular Materials CELLMAT 2012, Deutsche Gesellschaft für Materialkunde e.V., Frankfurt (2012) 4 Seiten Link

Hohe, J.; Beckmann, C.; Probabilistic homogenization of hexagonal honeycombs with perturbed microstructure; Mechanical Materials 49 (2012) 13-29 Link

Hohe, J.; Beckmann, C.; Probabilistic homogenization of solid foams with application to sandwich structures; in Proc. of 23rd International Congress Theoretical and Applied Mechanics; Bai, Y. (Ed.); The Chinese Society of Theoretical and Applied Mechanics CSTAM, Beijing, China (2012) 2 Seiten Link

Hohe, J.; Hardenacke, V.; Analysis of uncertainty effects due to microstructural disorder in cellular or porous materials; International Journal of Solids and Structures 49/7-8 (2012) 1009-1021 Link

Weise, J.; Baumeister, J.; Böhme, W.; Hohe, J.; Quasi-static and dynamic compression behaviour of epoxy-aluminium hybrid foams; in Tagungsband Cellular Materials CELLMAT 2012; Deutsche Gesellschaft für Materialkunde e.V., Frankfurt a.M. (2012) Link

Weise, J.; Baumeister, J.; Hohe, J.; Böhme, W.; Beckmann, C.; Epoxy aluminium hybrid foam – an innovative sandwich core material with improved energy absorption characteristics; in Proc. of 10th International Conference Sandwich Structures 2012 ICSS-10 ; Casrari, P. (Ed.); Université de Nantes, Nantes, France (2012) 81-82 Link

Hohe, J.; Beckmann, C.; Numerical analysis of disorder effects in the thermo-mechanical behaviour of solid foams; in Proc. of 16th International Conference on Composite Structures ICCS16, Ferreira, A. J.M. (Ed.); University of Porto,  Porto, Portugal (2011)

Hohe, J.; Beckmann, C.; Probabilistic homogenization of solid foams; PAMM 11/1 Special Issue: 82nd Annual Meeting of the International Association of Applied Mathematics and Mechanics GAMM 2011, (2011) 527-528 Link

to top

2010

Eisler, H.; Reif, M.; Henning, F.; Investigations on the mechanical behaviour of hybrid polymer metal joints; in Proc. of ECCM14 - 14th European Conference on Composite Materials 2010, Asp, L. (Ed.), European Society for Composite Materials, Moelndal, Schweden (2010) 670-ECCM14 1-10

Gall, M.; Thielicke, B.; Performance characterization and failure analysis for laminar PZT components; ACTUATOR 2010, Proceedings 12th International Conference on New Actuators, Borgmann, H. (Hrsg.) Messe Bremen Ges., Bremen (2010) 605-608 Link

Hardenacke, V.; Hohe, J.; Assessment of space division strategies for generation of adequate computational models for solid foams; International Journal of Mechanical Sciences 52/12 (2010) 1772-1782 Link

Hohe, J.; Load and frequency interaction in dynamic buckling of soft-core sandwich plates and shells PAMM 10/1; Special Issue: 81st Annual Meeting of the International Association of Applied Mathematics and Mechanics GAMM 2010 (2010) 165-166 Link

Hohe, J.; Load frequency interaction effects in the dynamic buckling of foam core sandwich structures; in Proc. of ICSS-9, 9th International Conference on Sandwich Structures 2010, Ravichandran, G. (Ed.); California Institute of Technology Pasadena, CA, USA (2010)

Hohe, J.; Beckmann, C.; Hardenacke, V.; Strategies for numerical prediction of the uncertainty in the material response of solid foams; in Extended abstracts. Book B, First International Conference on Materials for Energy 2010; DECHEMA e.V., Frankfurt (2010) 960-962 Link

Hohe, J.; Beckmann, C.; Reinfried, M.; Luthardt, F.; Numerical prediction of the macroscopic material response for the design of solid foams with structural hierarchy; in Proc. of International Conference on Cellular Materials, CellMat 2010, Stephani, G.; Hipke, T.; Scheffler, M.; Adler, J. (Eds.); Deutsche, Gesellschaft für Materialkunde e.V., Frankfurt (2010) 353-358 Link

Hohe, J.; Hardenacke, V.; Beckmann, C.; Numerical homogenization analysis of disorder effects in the effective thermo-mechanical response of structural foams and porous solids; in Proc. of 4th European Conference on Computational Mechanics ECCM 2010; Allix, O.; Wriggers, P. (Eds.); University of Rome, Rome, Italy (2011)

Scherm, F.; Völkl, R.; Neubrand, A.; Bosbach, F.; Glazel, U.; Mechanical characterisation of interpenetrating network metalceramic composites; Materials Science and Engineering A 527/4-5 (2010) 1260-1265 Link

Standke, G.; Müller, T.; Neubrand, A.; Weise, J.; Göpfert, M.; Cost-efficient metal-ceramic composites - novel foam-preforms, casting processes and characterisation; Advanced Engineering Materials 12/3 (2010) 189-196 Link

Ziegler, T.; Neubrand, A.; Piat, R.; Multiscale homogenization models for the elastic behaviour of metal/ceramic composites with lamellar domains; Composites Science and Technology 70/4 (2010) 664-670 Link

to top

2009

Demiray, S.; Becker, W.; Hohe, J.; Investigation of the fatigue behavior of open cell foams by a micromechanical 3-D model, Materials Science and Engineering: A 504/1-2 (2009) 141-149 Link

Gall, M.; Thielicke, B.; Schmidt, I.; Integrity of piezoceramic patch transducers under cyclic loading at different temperatures, Smart Materials and Structures 18/10 (2009) 104009 1-10 Link

Hardenacke, V., Hohe, J.; Local probabilistic homogenization of two-dimensional model foams accounting for micro structural disorder, International Journal of Solids and Structures 46/5 (2009) 989-1006 Link

Ziegler, T.; Neubrand, A.; Roy, S.; Wanner, A.; Elastic constants of metal/ceramic composites with lamellar microstructures: Finite element modelling and ultrasonic experiments, Composite Science and Technology 69/5 (2009) 620-626 Link

to top

2007-2008

Hohe, J.; Librescu, L.; Recent results on the effect of transverse core compressibility on static and dynamic response of sandwich structures; Composites Part B 39/1 (2008) 108-119 Link

Demiray, S.; Becker, W.; Hohe, J.; Numerical determination of initial and subsequent yield surfaces of open-celled model foams; International Journal of Solids and Structures 44/7-8 (2007) 2093-2108 Link

Gall, M.; Thielicke, B.; Life-span investigation of piezoceramic patch sensors and actuators; Proc. of SPIE 6526, Behavior and Mechanics of Multifunctional and Composite Materials 2007; Dapino, M. J. (Ed.9, SPIE, Bellingham, WA, USA (2007) 65260P-1 Link

Hardenacke, V.; Hohe, J.; Local stochastic analysis of the effective material response of disordered two-dimensional model foams; PAMM 7/1; Special Issue: 6th International Congress on Industrial Applied Mathematics ICIAM07 and GAMM Annual Meeting 2007 (2007) 4080001-4080002 Link

Hohe, J.; Hardenacke, V.; Numerical analysis of uncertainties in the effective material behaviour of disordered structural foams; PAMM 7/1; Special Issue: 6th International Congress on Industrial Applied Mathematics ICIAM07 and GAMM Annual Meeting 2007 (2007) 4080013-4080014 Link

Schreiner, H.-J.; Baier, T.; Baumann, H.; Bindig, R.; Gall, M.; Schmitz, H.; Thielicke, B.; Development of an implantable peristaltic micropump system; ACTUATOR 2008: Proceedings 11th International Conference on New Actuators; Borgmann, H. (Hrsg.) Messe Bremen Ges., Bremen (2008) 827-829

to top