Fraunhofer Institute for Mechanics of Materials IWMDissertations
Raga, R.; Damage initiation and evolution in silicon nitride under cyclic and rolling contact; Fraunhofer IWM Forschungsberichte 16, Fraunhofer IWM (Hrsg.) Fraunhofer Verlag, Stuttgart (2017) Link
Contributions to newspapers, books and conferences as well as dissertations and project reports
© iStock
Publications: Tribological component testing and system analysis
2023
Gatti, J.F.; Cai, W.; Herzog, R.; Gharavian, A.; Kailer, A.; Baltes, N.; Rabenecker, P.; Mörchel, P.; Balzer, B.N.; Amann, T.; Rühe, J., Investigation of programmable friction with ionic liquid mixtures at the nano- and macroscales, Lubricants 11/9 (2023) Art. 376, 20 pp. Link
Gatti, S.F.; Gatti, F.; Amann, T.; Kailer, A.; Moser, K.; Weiss, P.; Seidel, C.; Rühe, J., Tribological performance of electrically conductive and self-lubricating polypropylene–ionic-liquid composites, RSC Advances 13/12 (2023) 8000-8014 Link
Ge, Y.; Lin, N.; Du, C.; Amann, T.; Feng, H.; Yuan, C.; Li, K., Improved boundary lubrication of perfluoropolyether using fluoropolymer-grafted cellulose nanocrystal, Cellulose 30/6 (2023) 3757-3771 Link
Koplin, C.; Schlüter, B.; Hohe, J.; Schirmeister, C.; Hees, T.; Mühlhaupt, R.; Jaeger, R., 3D printing of lightweight »All-Polyethylene Single Component« composite materials designed for circularity, Fraunhofer Direct Digital Manufacturing Conference DDMC 2023; Müller, B. (Hrsg.); Fraunhofer Verlag, Stuttgart (2023) 5 pp. Link
Koplin, C.; Schwarzer-Fischer, E.; Zschippang, E.; Löw, Y. M.; Czekaööa, M.; Seibel, A.; Rörich, A.; Georgii, J.; Güttler, F.; Yarar-Schlickewei, S.; Kailer, A., Design of reliable remobilisation finger implants with geometry elements of a triple periodic minimal surface structure via additive manufacturing of silicon nitride, J — Multidisciplinary Scientific Journal 6/1 (2023) 180-197 Link
König, T.; Kimpel, T.; Kürten, D.; Kailer, A.; Dienwiebel, M., Influence of atmospheres on the friction and wear of cast iron against chromium plated steel at high temperatures, Wear 522 (2023) Art. 204695, 17 pp. Link
Li, K.; Yang, Y.; Amann, T.; Yuan, C., Synergistic effect of 1,3-diketone fluid and carbon-based nanoparticles as hybrid eco-friendly additives in polyalphaolefin oil, Tribology Letters 71/2 (2023) Art. 53, 16 pp. Link
Li, J.; Yuan, Y.; Amann, T.; Yuan, C.; Li, K., Macroscopic oil-based superlubricity achieved on steel surfaces with the roughness of engineering level, Tribology Letters 71/2 (2023) Art. 32, 10 pp. Link
Michaelis, J.U.; Kiese, S.; Amann, T.; Folland, C.; Asam, T.; Eisner, P., Thickening properties of carboxymethyl cellulose in aqueous lubrication, Lubricants 11/3 (2023) Art. 12, 21 pp. Link
Xu, Y.; Nie, Z.; Li, J.; Du, C.; Amann, T.; Yuang, C.; Li, K., Enhanced superlubricity of 1,3-diketone oil by doping polydopamine functionalized silica nano-additive, Tribology International 185 (2023) Art. 108584, 11 pp. Link
Yuan, Y.; Amann, T.; Xu, Y.; Zhang, Y.; Chen, J.; Yuan, C.; Li, K., Load and velocity boundaries of oil-based superlubricity using 1,3-diketone, Friction 11/5 (2023) 704-715 Link
2022
Begand, S.; Spintzyk, S.; Geis-Gerstorfer, J.; Bourauel, C.; Keilig, L.; Lohbauer, U.; Keilig, L.; Worpenberg, C.; Greuling, A.; Adjiski, R.; Jandt, K.D.; Lümkemann, N.; Stawarczyk, B.; Güllmar, A.; Kailer, A.; Oberle, N.; Stephan, M., Fracture toughness of 3Y-TZP ceramic measured by the Chevron-Notch Beam method: A round-robin study, Dental Materials 19/7 (2022) 1128-1139 Link
Beyer-Faiss, S.; Korth, Y.; Amann, T.; Schubert, T.; Plebst, S., Novel nanocomposite with ionic liquid and graphene for electroconductive radial plain bearings, in Proc. of 23rd International Colloquium Tribology: Industrial and Automotive Lubrication 2022 Vol. 23/1; Fatemi, A.; Pauschitz, A.; Topolovec-Miklozic, K. (Eds.); expert verlag, Deutschland (2022) 33-35 Link
Li, J.; Lin, N.; Du, C.; Ge, Y.; Amann, T.; Feng, H.; Yuan, C.; Li, K., Tribological behavior of cellulose nanocrystal as an eco-friendly additive in lithium-based greases, Carbohydrate Polymers 290 (2022) Art. 119478, 9 pp. Link
Schlüter, B.; Schröder, C.; Zhang, W.; Mühlhaupt, R.; Degenhardt, U.; Sediák, R.; Dusza, J.; Batázsi, C.; Kailer, A., Influence of graphene type and content on friction and wear of silicon carbide/graphene nanocomposites in aqueous environment, Materials 15/21 (2022) Art. 7755, 18 pp. Link
2021
Amann, T.; Gatti, F.; Li, K.; Demirel, Y.; Kailer, A.; Feng, H.; Yuan, C., Investigation of ionic liquids with and without graphene as lubricant additive for metal/metal and metal/PEEK contacts over a wide temperature range, Lubrication Science 33/2 (2021) 100-11 Link
Beyer-Faiss, S.; Korth, Y.; Amann, T.; Schubert, T.; Plebst, S., Tribological behavior of electrically conductive lubricants and adapted nanocomposites in sliding bearings using ionic liquids and graphene; in Tagungsband Reibung, Schmierung und Verschleiß: Forschung und praktische Anwendungen, 62. Tribologie-Fachtagung 2021; Gesellschaft für Tribologie e.V., Jülich (2021) 31/1- 32/11 Link
Chalissery, D.; Schönfeld, D.; Walter, M.; Shklyar, I.; Andrae, H.; Schwörer, C.; Amann, T.; Weisheit, L.; Pretsch, T., Highly shrinkable objects as obtained from 4D printing, Macromolecular Materials and Engineering 307/1 (2021) Art. 2100619, 12 pp. Link
De Raeve, K.; Borsoi Klein, T.; Matthey, B.; Schmiedel, C.; Kraenzler, T.; Kailer, A.; Kunze, S.; Faulhaber, S., Prototype tilting pad thrust bearing with novel ceramic material for harsh service environments, in Proc. of 50th Turbomachinery & 37th International Pump Users Symposia (TPS 2021); Texas A&M Engineering Experiment Station, TAMU, TX, USA (2021) 19 pp.
Liu, G.; Huang, C.; Zhao, B.; Wang, W., Effect of Machined Surface Integrity on Fatigue Performance of Metal Workpiece: A Review, Chinese Journal of Mechanical Engineering, (English Edition) 34/1 (2021) Art. 118, 16 pp. Link
Yang, J.; Yuan, Y.; Li, K.; Amann, T.; Wang, C.; Yuan, C.; Neville, A., Ultralow friction of 5CB liquid crystal on steel surfaces using a 1,3-diketone additiv, Wear 480-481 (2021) Art. 203934, 8 pp. Link
Zhao, B.; Khader, I.; Liu, H.; Zhou, T.; Konrath, G.; Kailer, A., Tribological characterization of an alumina-based composite in dry sliding contact against laser-heated and unheated Inconel 718, Tribology International 155 (2021) Art. 106773, 13 pp. Link
2020
Chen, W.; Amann, T.; Kailer, A.; Rühe, J., Macroscopic friction studies of alkylglucopyranosides as additives for water-based lubricants, Lubricants 8/1 (2020) Art. 11, 13 pp. Link
Gatti, F.; Amann, T.; Kailer, A.; Baltes, N.; Rühe; J.; Gumbsch, P., Towards programmable friction: control of lubrication with ionic liquid mixtures by automated electrical regulation, Scientific Reports 10/1 (2020) Art. 17634, 10 pp. Link
Khader, I.; Schröder, C.; Stockmann, J.; Beckert, W.; Kunz, W.; Kailer, A., Characterization of a silicon nitride ceramic material for ceramic springs, Journal of the European Ceramic Society 40/10 (2020) 3541-3554 Link
Kürten, D.; Khader, I.; Kailer, A., Determining the effective hydrogen diffusion coefficient in 100Cr6, Materials and Corrosion 71/6 (2020) 918-923 Link
Kürten, D.; Khader, I.; Kailer, A., Tribochemical degradation of vacuum‐stable lubricants: A comparative study between multialkylated cyclopentane and perfluoropolyether in a vacuum ball‐on‐disc and full‐bearing tests, Lubrication Science 32/4 (2020) 183-191 Link
Li, K.; Jiang, J.; Amann, T.; Yuan, Y.; Wang, C.; Yuan, C.; Neville, A., Evaluation of 1,3-diketone as a novel friction modifier for lubricating oils, Wear 452-453 (2020) 203299, 7 pp. Link
Oberle, N.; Amann, T.; Kürten, D.; Raga, R.; Kailer, A., In-situ-determination of tribologically induced hydrogen permeation using electrochemical methods, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 234/7 (2020) 1027-1034 Link
Zhao, B.; Khader, I.; Raga, R.; Degenhardt, U.; Kailer, A., Tribological behavior of three silicon nitride ceramics in dry sliding contact against Inconel 718 in a wide range of velocities, Wear 448-449 (2020) 203206, 9 pp. Link
2019
Chen, W.; Amann, T.; Kailer, A.; Rühe, J., Thin-film lubrication in the water/octyl β-d-glucopyranoside system: Macroscopic and nanoscopic tribological behavior, Langmuir 35/22 (2019) 7136-7145 Link
Khader, I.; Kürten, D.; Raga, R.; Winzer, N.; Kailer, A., Modeling hydrogen diffusion in a tribological scenario: A failure analysis of a thrust bearing, Wear 438-439 (2019) 203054 1-15 Link
Kürten, D.; Kailer, A.; Khader, I., Hydrogen assisted rolling contact fatigue, VDI-Berichte 2348, 13. VDI-Fachtagung Gleit- und Wälzlagerungen 2019, Gestaltung - Berechnung - Einsatz; VDI Wissensforum GmbH (Hrsg.); VDI Verlag GmbH, Düsseldorf (2019) 273-286 Link
Kürten, D.; Khader, I.; Raga, R.; Casajús, P.; Winzer, N.; Spallek, R.; Scherge, M., Hydrogen assisted rolling contact fatigue due to lubricant degradation and formation of white etching areas, Engineering Failure Analysis 99 (2019) 330-342 Link
Kurz, J.; Amann, T.; Kailer, A., Tribological investigations of silicon nitride lubricated by ionic liquid aqueous solutions, Tribology Transactions 62/2 (2019) 295-303 Link
Zhao, B.; Khader, I.; Raga, R.; Konrath, G.; Degenhardt, U.; Kailer, A., High temperature tribological properties of silicon nitride in dry sliding contact against Inconel 718 heated by laser, Wear 434-435 (2019) 203000, 9 pp. Link
2018
Amann, T., Gatti, F., Oberle, N.; Kailer, A.; Rühe, J., Galvanically induced potentials to enable minimal tribochemical wear of stainless steel lubricated with sodium chloride and ionic liquid aqueous solution, Friction 6/2 (2018) 230-242 Link
Amann, T.; Waidele, M.; Kailer, A., Analysis of mechanical and chemical mechanisms on cavitation erosion-corrosion of steels in salt water using electrochemical methods, Tribology International 124 (2018) 238-246 Link
Förg, A.; Konrath, G.; Popa, S.; Kailer, A.; Killinger, A.; Gadow, R., Tribological properties of high velocity suspension flame sprayed (HVSFS) ceramic coatings, Surface and Coatings Technology 349 (2018) 901-908 Link
Li, K.; Zhang, S.; Liu, D.; Amann, T.; Zhang, C.; Yuan, C.; Luo, J., Superlubricity of 1,3-diketone based on autonomous viscosity control at various velocities, Tribology International 126 (2018) 127-132 Link
Liu, D.; Li, K.; Zhang, S.; Amann, T.; Zhang, C.; Yan; X., Anti-spreading behavior of 1,3-diketone lubricating oil on steel surfaces, Tribology International 121 (2018) 108-113 Link
Zhang, W. ; Schröder, C.; Schlüter, B.; Knoch, M. ; Dusza, J.; Sedlak, R.; Mülhaupt, R.; Kailer, A., Effect of mechanochemically functionalized multilayer graphene on the tribological properties of silicon carbide/graphene nanocomposites in aqueous environment, Tribology Letters 66/4 (2018) Art. 121, 12 pp. Link
2017
Amann, T.; Kailer, A.; Oberle, N.; Li, K.; Walter, M.; List, M.; Rühe, J.; Macroscopic superlow friction of steel and diamond-like carbon lubricated with a formanisotropic 1,3-diketone; ACS Omega 2/11 (2017) 8330-8342 Link
Balázsi, C.; Fogarassy, Z.; Tapasztó, O.; Kailer, A.; Schröder, C.; Parchoviansky, M.; Galusek, D.; Dusza, J.; Balázsi, K.; Si3N4/graphene nanocomposites for tribological application in aqueous environments prepared by attritor milling and hot pressing; Journal of the European Ceramic Society 37/1 (2017) 3797–3804 Link
Khader, I.; Rasche, S.; Lube, T.; Raga, R.; Degenhardt, U.; Kailer, A.; Lifetime prediction of ceramic components - a case study on hybrid rolling contact; Engineering Fracture Mechanics 169 (2017) 292-308 Link
Khader, I.; Renz, A.; Kailer, A.; A wear model for silicon nitride in dry sliding contact against a nickel-base alloy; Wear 376-377/Part A (2017) 352-362 Link
Raga, R.; Khader, I.; Chlup, Z.; Kailer, A.; Damage progression in silicon nitride undergoing non-conforming hybrid cyclic contact; International Journal of Fatigue 105 (2017) 97-110 Link
Raga, R.; Khader, I.; Zdeněk, C.; Kailer, A.; Experimental and numerical investigation of crack initiation and propagation in silicon nitride ceramic under rolling and cyclic contact; Journal of Physics: Conference Series (JPCS) 843/1 (2017) 012030 1-9 Link
Renz, A.; Kürten, D.; Lehmann, O.; Wear of hardfaced valve spindles in highly loaded stationary lean-burn large bore gas engines; Wear 376-377/Part B (2017) 1652-1661 Link
Schröder, C.; Kiemle, T.; Kailer, A.; Berthold, C.; Nickel, K. G.; Cyclic contact loading of Y-TZP ceramics with spherical SSiC shape under ambient air and water-lubricated conditions; Journal of the European Ceramic Society 37/6 (2017) 2449 - 2458 Link
2016
Amann, T.; Dold, C.; Kailer, A.; Potential controlled tribological behavior of water-based ionic liquids; Key Engineering Materials 674 (2016) 250-256 Link
Amann, T.; Kailer, A.; Beyer-Faiß, S.; Stehr, W.; Metzger, B.; Development of sintered bearings with minimal friction losses and maximum life time using infiltrated liquid crystalline lubricants; Tribology International 98 (2016) 282-291 Link
Kailer, A.; Stephan, M.; On the feasibility of the Chevron Notch Beam method to measure fracture toughness of fine-grained zirconia ceramics; Dental Materials 32/10 (2016) 1256–1262 Link
Kohal, R.J.; Bachle, M.; Renz, A.; Butz, F.; Evaluation of alumina toughened zirconia implants with a sintered, moderately rough surface: An experiment in the rat; Dental Materials 32/1 (2016) 65-72 Link
Kürten, D.; Winzer, N.; Kailer, A.; Pfeiffer, W.; Spallek, R.; Scherge, M.; In-situ detection of hydrogen evolution in a lubricated sliding pin on disk test under high vacuum; Tribology International 93/A (2016) 324–331 Link
Raga, R.; Khader, I.; Chlup, Z; Kailer, A.; Damage initiation and evolution in silicon nitride under non-conforming lubricated hybrid rolling contact; Wear 360-361 (2016) 147–159 Link
Renz, A.; Khader, I.; Kailer, A.; Tribochemical wear of cutting-tool ceramics in sliding contact against a nickel-base alloy; Journal of the European Ceramic Society 36/3 (2016) 705-717 Link
2014-2015
Amann, T.; Kailer, A.; Herrmann, M.; Influence of electrochemical potentials on the tribological behavior of silicon carbide and diamond-coated silicon carbide; Journal of Bio- and Tribo-Corrosion 1/4 (2015) 30 1-14 Link
Dold, C.; Amann, T.; Kailer, A.; Influence of electric potentials on friction of sliding contacts lubricated by an ionic liquid; Physical Chemistry Chemical Physics PCCP 17/16 (2015) 10339–10342 Link
Li, K.; Amann, T.; List, M.; Walter, M.; Moseler, M.; Kailer, A.; Rühe, J.; Ultralow friction of steel surfaces using a 1,3-diketone lubricant in the thin film lubrication regime; Langmuir 31/40 (2015) 11033–11039 Link
Ruck, J.; Othmani, Y.; Lube, T.; Khader, I.; Kailer, A.; Böhlke, T.; Macroscopic damage modeling for silicon nitride; PAMM 15/1 Special Issue: 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM); Zavarise, G.; Cinnella, P.; Campiti, M. (Eds.); Wiley-VCH Verlag, Weinheim (2015) 147-148 Link
Pogodina, N.V.; Amann, T.; Dold, C.; Metwalli, E.; Müller-Buschbaum, P.; Kailer, A.; Friedrich, C.; Triborheology and orientational dynamics of ironic liquid crystals; Journal of Molecular Liquids 192 (2014) 118-126 Link
Schlüter, B.; Mülhaupt, R.; Kailer, A.; Synthesis and tribological characterization of stable dispersions of thermally reduced graphite oxide; Tribology Letters 53/1 (2014) 353-363 Link
Schröder, C.; Renz, A.; Koplin, C.; Kailer, A.; Assessment of low-temperature degradation of Y-TZP ceramics based on Raman-spectroscopic analysis and hardness indentation; Journal of the European Ceramic Society 34/16 (2014) 4311-4319 Link
2013
Amann, T.; Dold, C.; Kailer, A.; Complex fluids in tribology to reduce friction: mesogenic fluids, ionic liquids and ionic liquid crystals; Tribology International 65 (2013) 3-12 Link
Dold, C.; Amann, T.; Kailer, A.; Influence of structural variations on imidazolium based ionic liquids; Lubrication Science 25/4 (2013) 251-268 Link
Dold, C.; Amann, T.; Kailer, A.; Tribological properties of imidazolium-based ionic liquids and the influence of polarization; in Proc. of 5th World Tribology Congress WTC 2013; Raparelli, T.; Gola, M. (Eds.); Italian Tribology Association AIT, Torino, Italy (2013) 1642-1645 Link
Khader, I.; Kürten, D.; Kailer, A.; Modeling of wear in silicon nitride in rolling-sliding contact; in Proc. of 5th World Tribology Congress WTC 2013; Raparelli, T.; Gola, M. (Eds.); Italian Tribology Association AIT, Torino, Italy (2013) 3133-3136 Link
Khader, I.; Renz, A; Kailer, A.; Haas, D.; Thermal and corrosion properties of silicon nitride for copper die casting components; Journal of the European Ceramic Society 33/3 (2013) 593-602 Link
Kohal, R.J.; Bächle, M.; Att, W.; Chaar, S.; Altmann, B.; Renz, A.; Butz, F.; Osteoblast and bone tissue response to surface modified zirconia and titanium implant materials; Dental Materials 29/7 (2013) 763-776 Link
Kuerten, D.; Winzer, N.; Kailer, A.; Pfeiffer, W.; Scherge, M.; In situ detection of hydrogen evolution during lubricated sliding contact; in Proc. of 5th World Tribology Congress WTC 2013; Raparelli, T.; Gola, M. (Eds.); Italian Tribology Association AIT, Torino, Italy (2013) 3573-3576 Link
Li, K.; Amann, T.; Walter, M.; Moseler, M.; Kailer, A.; Rühe, J.; Ultralow friction induced by tribochemical reactions: a novel mechanism of lubrication on steel surfaces; Langmuir 29/17 (2013) 5207-5213 Link
Schlüter, B.; Kailer, A.; Mülhaupt, R.; Functionalized graphene: fabrication and tribological behavior in ester oil; in Proc. of 5th World Tribology Congress WTC 2013; Raparelli, T.; Gola, M. (Eds.); Italian Tribology Association AIT, Torino, Italy (2013) 2772-2774 Link
Steier, V.F.; Koplin, C.; Kailer, A.; Wessely, P.J.; Influence of pressure-assisted polymerization on the microstructure and strength of polymer-infiltrated ceramics; Journal of Materials Science: JMS 48/8 (2013) 3239-3247 Link
Wessely, F.; Birinci, E.; Riedinger, B.; Schwalke, U.; In situ CCVD grown graphene transistors with ultra-high on-off-current ratio in silicon CMOS compatible processing; Advances in science and technology 77 (2013) 258-265 Link
Wessely, P.J.; Wessely, F.; Birinci, E.; Riedinger, B.; Schwalke, U.; Transfer-free grown bilayer graphene transistors for digital applications; Solid-State Electronics 81 (2013) 86-90 Link
2011-2012
Amann, T.; Dold, C.; Kailer, A.; Rheological characterization of ionic liquids and ionic liquid crystals with promising tribological performance; Soft Matter 8/38 (2012) 9840-9846 Link
Khader, I.; Kürten, D.; Kailer, A.; A study on the wear of silicon nitride in rolling-sliding contact; Wear 296/1-2 (2012) 630-637 Link
Pastewka, L.; Mrovec, M.; Moseler, M.; Gumbsch, P.; Bond order potentials for fracture, wear and plasticity; MRS Bulletin 37/5 (2012) 493-503 Link
Wessely, P.J.; Wessely, F.; Birinci, E.; Schwalke, U.; Riedinger, B.; Transfer-free fabrication of graphene transistors; Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena 30/3 (2012) 03D114 1-5 Link
Amann, T.; Kailer, A.; Analysis of the ultralow friction behavior of a mesogenic fluid in a reciprocating contact; Wear 271/9-10 (2011) 1701-1706 Link
Amann, T.; Kailer, A.; Rheological and tribological investigation of a mesogenic fluid with ultralow friction; in Tagungsband ECOTRIB 2011, Vol. 1; Franek, F. (Ed.) ÖTG Österreichische Tribologische Gesellschaft, Wien, Österreich (2011) 83-88 Link
Kailer, A.; Amann, T.; Krummhauer O.; Herrmann, M.; Sydow, U.; Schneider, M.; Influence of electric potentials on the tribological behaviour of silicon carbide; Wear 271/9-10 (2011) 1922-1927 Link
Khader, I.; Kailer, A.; Hashibon, A.; Albina, J.-M.; Wear and corrosion of silicon nitride rolling tools in copper rolling; Wear 271/9-10 (2011) 2531-2541 Link
Presser, V.; Krummhauer, O.; Kailer, A.; Nickel, K.G.; In-situ-monitoring and depth-resolved characterization of wet wear of silicon carbide; Wear 271/9-10 (2011) 2665-2672 Link
Steier, V.; Koplin, C.; Kailer, A.; Reinecke, H.; Investigation of the adhesion promoter distribution in porous ceramic precursors; International Scholarly Research Network ISRN Mechanical Engineering 2011 (2011) 304129 1-9 Link
Wessely, P.J.; Wessely, F.; Birinci, E.; Beckmann, K.; Riedinger, B.; Schwalke, U.; Silicon-CMOS compatible in-situ CCVD grown graphene transistors with ultra-high on/off-current ratio; Physica E: Low-dimensional systems and nanostructures 44/7-8 (2011) 1132-1135 Link
2008-2010
Amann, T.; Kailer, A.; Ultralow friction and reciprocating systems lubricated by mesogenic fluids; in Proc. of 17th International Colloquium Tribology – Solving Friction and Wear Problems; Bartz, W. J. (Ed.); Technische Akademie Esslingen TAE, Ostfildern (2010) 101 Link
Amann, T.; Kailer, A.; Ultralow friction of mesogenic fluid mixtures in tribological reciprocating systems; Tribology Letters 37/2 (2010) 343-352 Link
Khader, I.; Kailer, A.; Damage mechanisms in silicon nitride wires rolling tools: lab-scale experiments and correlation with finite element modeling; Journal of Materials Processing Technology 210/10 (2010) 1314-1325 Link
Kailer, A.; Amann, T.; Konrath, G.; Ultralow friction and wear of reciprocating systems lubricated by rystalline fluids; Friction, Wear & Wear Protection, Proc. of International Symposium on Friction, Wear and Wear Protection 2008; Fischer, C.; Bobzin, K. (Eds.); Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim (2009) 409-416 Link
Khader, I.; Kailer, A.; Silicon nitride wire-rolling tools: a failure-mode analysis and correlation with rolling-contact fatigue; in Proc. of 11th International Conference and Exhibition of the European Ceramic Society, Vol. 1, Bućko, M. M.; Haberko, K.; Pędzich, Z.; Zych, L. (Eds.),Curran, Red Hook, NY, USA (2009) 74-83 Link
Kuzmychov, O.; Koplin, C.; Jaeger, R.; Büchner, H.; Gopp, U.; Physical aging and the creep behavior of acrylic bone cements; Journal of Biomedical Materials Research Part B: Applied Biomaterials 91/2 (2009) 910-917 Link
Presser, V.; Krummhauer, O.; Nickel, K. G; Kailer, A.; Berthold, C.; Raisch, C.; Tribological and hydrothermal behaviour of silicon carbide under water lubrication; Wear 266/7-8 (2009) 771–781 Link
Presser, V.; Nickel, K.G.; Krummhauer, O.; Kailer, A., A model for wet silicon carbide tribo-corrosion, Wear 267/1-4 (2009) 168-176 Link
Renz, A.; Kailer, A.; Koplin, C.; Testing the feasibility of new ceramic cutting tools – a case study on experimental and numerical evaluation of geometry and machining techniques; in Proc. of 11th International Conference and Exhibition of the European Ceramic Society, Vol. 1, Bućko, M. M.; Haberko, K.; Pędzich, Z.; Zych, L. (Eds.),Curran, Red Hook, NY, USA (2009) 1006-1012 Link
Kailer, A.; Mauk, P. J.; Eckardt, C.; Berroth, K.; Kozlowski, J.; Wagemann, A.; Ceramic rolling tools and components for enhanced lifetime and product quality; Steel Research International 79; Metall Forming 2008, Proc. of 12th International Conference on Metall Forming 2008; Pietrzyk, M. (Ed.); Verlag Stahleisen, Düsseldorf (2008), 401-406 Link
May, U.; Stromberger, F.; Kohl, J.; Schubert, J.; Berroth, K.; Kailer, A.; Technology potential of ceramic piston pins; MTZ worldwide 69/5 (2008) 46-51 Link
1999-2007
Khader, I.; Gumbsch, P.; Kailer, A.; Damage mechanisms of silicon nitride rolls in hot rolling of copper wire; in Tagungsband 48. Tribologie-Fachtagung Reibung, Schmierung und Verschleiß, Forschung und praktische Anwendungen 2007, Gesellschaft für Tribologie GFT, Aachen (2007) 73/1-73/14 Link
Kailer, A.; Hollstein, T.; Wötting, G.; Berroth, K.; Kozlowski, J.; Ceramic rolls for wires, tubes and sheets; in Proc. of the World Tribology Congress III 2005, Vol.1, ASME, New York, NY, USA, (2005) 815-816 Link
Blug, B.; Meier, S.; Pfeiffer, W.; Hollstein, T.; Design of DLC Coatings for high speed hybrid ball bearings; Current trends in tribology 2004; Vercammen, K.; Van Acker, K.; Meneve, J. (Eds.); Virtual Tribology Institute VTI, Mol, Belgium (2004) II/1-II/4 Link
Meschke, F.; Kailer, A.; Electrically driven cold water corrosion of SiC; CFI. Berichte der Deutschen Keramischen Gesellschaft 81/8 (2004) E19-E22 Link
Gogotsi, Y.G.; Domnich, V.; Dub, S.N.; Kailer, A.; Nickel, K.G., Cyclic nanoindentation and Raman microspectroscopy study of phase transformations in semiconductors, Journal of Materials Research 15/4 (2000) 871-879 Link
Gogotsi, Y. G.; Kailer, A.; Nickel, K. G.; Transformation of diamond to graphite; Nature 401 (1999) 663-664 Link
Kailer, A.; Nickel, K. G.; Gogotsi, Y. G.; Raman microspectroscopy of nanocrystalline and amorphous phases in hardness indentations; Journal of Raman Spectroscopy 30/10 (1999) 939-946 Link
- To Fraunhofer publica for online investigation (publica.fraunhofer.de)